Connectpro Master-IT PRO User Manual – Older model Bedienungsanleitung PDF herunterladen (Seite 12)

Buzzers and Beeps

Whenever a command or event is initiated, either a buzzer or beep will

sound to indicate a successful or failed command.

A built-in buzzer generates a high-pitch beep for correct hot-key

command; otherwise, one low-pitch beep for error

Hot-Key Commands

TO SELECT A PORT:

In a single master configuration, press and release the left CTRL key

twice, followed by the keys that represent the number of the port that

has the computer.

For example, to select a computer that is connected to port 5, press

and release the left CTRL key twice, then press the #5 key once.

CTRL , CTRL , 5

In a cascade configuration (master/slave), press and release the left

CTRL key twice, followed by the number key that represents the port

on the master that is being used to daisy-chain, then press the

number key that represent the port on the slave that the computer is

connected to.

For example, to select a computer that is connected to port # 8 of a

slave, when port # 1 of the master is used to daisy-chain, press and

release the left CTRL key twice, then press and release the #1 key,

then press and release the #8 key.

CTRL , CTRL , 1 , 8

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Keine Kommentare

Connectpro Master-IT PRO User Manual – Older model Bedienungsanleitung Seite 12